You know the cost before we start. Not after we’re done, not halfway through—before we touch a single wire. That’s how electrical work should be priced, and it’s how we’ve operated since 2004.
Your outlets stop buzzing. Your panel handles the load. Your lights stay on when you need them. If you’re upgrading to support an EV charger, adding circuits for a home office, or replacing a panel that’s been maxed out for years, you get work that passes inspection the first time.
Most homes in Kings Park built before 2000 are running on 100-amp service. That was fine before central air, multiple computers, kitchen appliances, and electric vehicles became standard. Now it’s not. We size your system for how you actually live—not how someone lived in 1985.
You also get a team that shows up on time, in branded vehicles, with the tools and licensing to do the job correctly. No shortcuts. No surprises. No wondering if it’s safe.
We’ve been serving Kings Park and the surrounding Suffolk County area since 2004. We’re fully licensed, insured, and locally based in Bohemia. Every electrician on our team is trained to handle residential and commercial electrical work with the same attention to detail.
We’ve earned the Angie’s List Super Service Award seven years in a row. That doesn’t happen by accident. It happens because we show up when we say we will, we communicate clearly, and we stand behind every job with a 100% satisfaction guarantee.
Kings Park has a mix of older homes and newer builds. The older ones often need panel upgrades, rewiring, or updated grounding systems. The newer ones need smart home integration, EV charger installations, or additional circuits to support modern demands. We handle both, and we’ve done it hundreds of times across Suffolk County.
You call or submit a request. We schedule a time that works for you—not just when we have an opening. If it’s an emergency, we respond 24/7.
We show up, assess the situation, and give you a clear explanation of what’s wrong and what needs to happen. Then we provide upfront pricing. You know the total cost before we start. If you approve, we get to work.
We pull permits when required, complete the work to code, and make sure everything is tested and safe before we leave. If an inspection is needed, we handle that too. You’re not left guessing whether it was done right.
Once the job is finished, we walk you through what we did and answer any questions. You get documentation, and if anything isn’t right, we come back and fix it. That’s the guarantee.
Ready to get started?
We handle panel upgrades, circuit installations, outlet and switch replacements, lighting installations, generator hookups, and EV charger setups. We also do electrical troubleshooting when something’s not working and you’re not sure why.
In Kings Park, one of the most common requests we get is upgrading from 100-amp to 200-amp service. That upgrade gives you the capacity to run central air, charge an electric vehicle, and power a modern kitchen without tripping breakers. It also future-proofs your home for whatever technology comes next.
We also install Level 2 EV chargers, which charge your vehicle in 4 to 8 hours instead of the 20+ hours you’d get from a standard outlet. Most homes need a dedicated 240-volt circuit for that, and we make sure your panel can handle the load before we install anything.
For older homes, we inspect wiring for safety issues like outdated aluminum wiring, missing GFCI outlets in kitchens and bathrooms, or panels with corrosion from age and humidity. Suffolk County’s proximity to the coast means salt air accelerates wear on outdoor electrical components, so we check those too.
If your breakers trip frequently, your lights dim when you turn on appliances, or your panel is warm to the touch, those are signs your system is overloaded. Most homes in Kings Park built before 2000 have 100-amp panels, which weren’t designed for today’s electrical demands.
A 200-amp upgrade gives you the capacity to safely run central air, electric vehicle chargers, home offices, and modern kitchen appliances without maxing out your system. It also brings your home up to current code, which matters if you ever sell or refinance.
We assess your current load, check the condition of your panel, and let you know whether an upgrade is necessary or if you can add circuits to your existing setup. The inspection is part of the free estimate.
The cost depends on whether your panel can handle the additional load and how far the charger is from your electrical panel. A Level 2 charger requires a dedicated 240-volt circuit, usually 40 to 50 amps.
If your panel is already at capacity, you’ll need an upgrade first. If you have space and your panel can handle it, we install the circuit and charger in the same visit. Distance matters too—if your garage or driveway is far from your panel, we may need to run conduit and additional wiring.
We give you upfront pricing after we assess your setup. Most installations in Kings Park range depending on the factors above, but you’ll know the exact cost before we start. We’ve installed chargers for Tesla, Ford, Chevy, and most other EV brands.
Yes. We respond to electrical emergencies 24/7. If you have sparking outlets, burning smells, complete power loss, or any situation that feels unsafe, call us immediately.
Electrical emergencies can’t wait until Monday morning. A loose connection or damaged wire can turn into a fire hazard in minutes. We prioritize emergency calls and get someone to your location as quickly as possible.
We’ve handled middle-of-the-night calls for everything from storm damage to failed panels to wiring issues that knocked out power to half a house. You’re not bothering us—this is what we’re here for.
Most panel upgrades take four to eight hours, depending on the complexity of your system and whether we’re upgrading from 100 to 200 amps or replacing an outdated panel.
We coordinate with PSEG Long Island to disconnect and reconnect power, pull the necessary permits from the Town of Smithtown, and schedule the required inspections. You’ll be without power for a portion of the day, but we work efficiently to minimize downtime.
Once the new panel is installed, we label every circuit clearly, test the system, and make sure everything is functioning safely. The inspection usually happens within a few days, and we handle that scheduling for you.
Yes. Every electrician on our team is fully licensed and insured. We carry liability insurance and workers’ compensation coverage, so you’re protected if anything goes wrong on the job.
We also pull permits for any work that requires them, including panel upgrades, service changes, and generator installations. That ensures your work is inspected and documented, which matters for insurance, resale value, and your own peace of mind.
Our team drives branded vehicles, wears uniforms, and carries the tools and credentials to complete the job correctly. You’re not getting a handyman with a voltage tester—you’re getting licensed professionals who do this full-time.
We serve all of Suffolk County, including Smithtown, Commack, Hauppauge, Nesconset, St. James, Stony Brook, and the surrounding towns. We’re based in Bohemia, so we’re centrally located to respond quickly across the area.
We’ve been working in Suffolk County since 2004, so we know the local code requirements, the common electrical issues in older homes, and the permitting process for each municipality. That experience makes the job faster and smoother for you.
If you’re in Suffolk County and need electrical work, we can help. Call us for a free estimate, and we’ll let you know exactly what’s involved and what it will cost.
Other Services we provide in Kings Park