You flip a switch and the lights come on. Your breakers stop tripping every time you run the microwave and coffee maker at the same time. The outlets in your kitchen can actually handle what you plug into them without getting warm to the touch.
That’s what happens when your electrical system is set up correctly for how you actually live. Not how homes were wired in 1975, but how you use power today.
In Setauket, NY, where 67% of homes were built before 1980, most electrical systems weren’t designed for modern demands. You’ve got a 100-amp panel trying to support central air, a home office, kitchen appliances, EV charging, and everything else that didn’t exist when your house was built. Something’s got to give.
We can assess what you’re working with, explain what needs updating, and handle the work so your electrical system supports your life instead of limiting it. No more resetting breakers. No more wondering if that flickering light is a fire hazard. Just reliable power when you need it.
Marra Electric has been a licensed electrical contractor in Setauket, NY and across Suffolk County since 2004. We show up in branded vehicles, give you a price before we start, and guarantee the work when we’re done.
Our team knows Suffolk County homes. We know the coastal corrosion issues from salt air. We know the storm damage patterns. We know what older homes need to meet current code and handle modern electrical loads.
Seven consecutive Angie’s List Super Service Awards aren’t something you get by cutting corners. You earn them by showing up on time, doing the work right, and treating people’s homes with respect. That’s been our approach for two decades, and it’s why homeowners in Setauket, NY keep calling us when they need electrical work done.
You call or contact us online and describe what’s going on. We schedule a time that works for you and show up when we say we will.
Our licensed electrician in Setauket, NY takes a look at your electrical system, figures out what’s causing the problem, and explains what needs to happen. You get a clear price before any work starts. No surprises, no padding the bill once we’re already there.
If you approve the work, we handle it the same day whenever possible. That includes pulling permits if needed, coordinating with PSEG Long Island for any utility work, and making sure everything meets current Suffolk County electrical code. When we’re done, your system works the way it should.
You get a satisfaction guarantee on the work. If something’s not right, we come back and fix it. That’s how we operate, and that’s what you get with Marra Electric in Setauket, NY.
Ready to get started?
Panel upgrades are a big part of what we do in Setauket, NY. Most older homes have 100-amp service that can’t handle EV chargers, central air upgrades, or even a fully loaded modern kitchen. We upgrade panels to 200-amp service so you have the capacity you actually need.
Emergency electrician services are available 24/7 because electrical problems don’t wait for business hours. Sparking outlets, burning smells, or complete power loss need immediate attention. We respond fast and fix it right.
Generator installations keep your power on during storms. Suffolk County sees its share of outages, especially in coastal areas. A properly installed generator means your refrigerator, sump pump, and critical systems stay running when the grid goes down.
EV charger installation is something more Setauket, NY homeowners are asking about. We install Level 2 chargers that work with your home’s electrical capacity, pull the right permits, and make sure everything’s done to code. Home electrical repair services also cover lighting installations, outlet additions, circuit repairs, and any other electrical work your property needs. Licensed electrical contractor services from Marra Electric mean you’re getting permitted, insured, professional work every time.
Your panel needs an upgrade if your breakers trip frequently, you see rust or corrosion on the panel box, you smell burning near the panel, or you’re adding major appliances or an EV charger. Most homes in Setauket, NY built before 1990 have 100-amp panels that struggle with modern electrical demands.
If you’re running space heaters because your HVAC system can’t keep up, or you can’t use multiple kitchen appliances at once without losing power, your panel is likely undersized. We can assess your current load, calculate what you actually need, and recommend whether a 200-amp upgrade makes sense.
Panels also have a lifespan. If yours is over 25 years old, especially if it’s a Federal Pacific or Zinsco brand, replacement isn’t just about capacity – it’s about safety. These older panels are known fire hazards and should be replaced regardless of how much power you’re using.
EV charger installation starts with making sure your electrical panel can handle the load. A Level 2 charger typically needs a dedicated 240-volt circuit with 40 to 50 amps. If your panel is already maxed out, you’ll need an upgrade before the charger goes in.
Once capacity is confirmed, we run a dedicated circuit from your panel to wherever you’re parking the vehicle – usually your garage or driveway. The charger gets mounted on the wall, wired to the circuit, and tested to make sure it’s charging correctly.
Permits are required for this work in Suffolk County. We handle the permit process, coordinate any required inspections, and make sure the installation meets all local codes. We also know how to work with PSEG Long Island if any utility coordination is needed. The whole process typically takes a day once the equipment arrives and your panel is ready.
Emergency electrician services in Setauket, NY cost more than scheduled appointments because you’re paying for immediate availability, after-hours work, and the priority response. Expect emergency rates to run 1.5 to 2 times higher than standard service calls.
That said, waiting on an electrical emergency usually costs more in the long run. A sparking outlet can turn into a house fire. A burning smell from your panel can mean you’re hours away from total failure. Water intrusion into electrical systems can cause damage that spreads the longer it sits.
The smarter move is catching problems early. If you notice flickering lights, warm outlets, buzzing sounds from your panel, or breakers that trip repeatedly, call during business hours and get it fixed before it becomes an emergency. We can schedule a diagnostic visit, identify the issue, and repair it at standard rates – saving you the emergency premium and the risk of bigger damage.
Yes, and here’s why it matters. Suffolk County requires permits for most electrical work beyond simple repairs like replacing a light fixture or outlet. Panel upgrades, new circuits, EV charger installations, and generator hookups all need permits and inspections.
Unpermitted electrical work creates problems when you sell your home. Buyers’ inspectors flag unpermitted upgrades, which can kill deals or force you to rip out the work and redo it properly. Your homeowner’s insurance can also deny claims if a fire or damage stems from unpermitted electrical modifications.
We pull permits as part of the service. The permit process ensures the work meets current National Electrical Code standards and local requirements. Inspections verify everything is safe and done correctly. It’s not red tape – it’s protection for your home’s value and your family’s safety. Our services include handling permits so you don’t have to worry about it.
Breakers trip when a circuit draws more power than it’s rated to handle, when there’s a short circuit, or when there’s a ground fault. Occasional tripping when you overload a circuit isn’t unusual – like running a hair dryer and space heater on the same bathroom circuit.
Frequent tripping is a problem. If the same breaker trips repeatedly under normal use, you’ve either got too many devices on that circuit, a failing breaker, or a wiring issue somewhere in the circuit. In Setauket, NY homes built before 1980, undersized circuits are common – bedrooms might only have one 15-amp circuit trying to power computers, TVs, phone chargers, and window AC units.
If a breaker trips and won’t reset, or if it feels hot to the touch, shut off your main breaker and call us immediately. A breaker that won’t reset can indicate a serious short circuit or ground fault that could cause a fire. We can diagnose whether you need circuit upgrades, breaker replacement, or a full panel upgrade to handle your actual electrical load safely.
Most residential electrical panel upgrades in Setauket, NY take one full day from start to finish. Your power will be off for several hours during the actual panel replacement, usually four to six hours depending on the complexity of your system.
The process involves coordinating with PSEG Long Island to disconnect service at the meter, removing your old panel, installing the new panel and breakers, reconnecting all your circuits, and restoring power. We then test every circuit to make sure everything works correctly.
If you’re upgrading from 100-amp to 200-amp service, PSEG may need to upgrade the service line coming into your home, which can add time to the project. Permit inspections also need to happen before your power is fully restored and the job is complete. We’ll walk you through the timeline when we assess your specific situation, so you know exactly what to expect and can plan accordingly.
Other Services we provide in Setauket